Ford WSG-1068 Engine
-
Standard Features & Benefits
- Composite Valve Train Covers for reduced noise and resistance to corrosion
- Hydraulic Lash Adjusters with Roller Finger Cam Followers for minimal frication and improved performance
- Tubular Cams with Powder Metal Loves for strength and durability
- Single Overhead Cams with Silent Timing Chain Drive System for reduced noise and friction, and increased durability
- Aluminum Cylinder Heads with Long Reach Mounting Bolts into Main Bearing Bulkhead to maintain resistance to heat distortion
- Optimized Combustion Process for reduced emissions and improved efficiency
- Stainless Steel Cylinder Head Gaskets for resistance to corrosion and increased cylinder block to cylinder head sealing
- Deep Skirted Cast Iron Block for strength and durability
- Doweled, Cross-Bolted Four-Bolt Main Bearing Caps for increased strength
- Forged Steel Crankshaft for increased strength and durability
- Split Pin Crankshaft Journals for smooth engine operation
- Powder Metal Connection Rods for high strength
- Hypereutectic Pistons with Teflon Coated Skirts and Low Tensions Rings for reduced friction and horsepower requirements
- Even Firing Order with Internal Balance Shaft for vibration-free operation
- Tuned Split-Plenum Intake delivers significantly more torque and/or power throughout the entire engine speed range
- High Flow Water Pumo for maintaining optimum coolant flow
- Coil on Plug Ignition System for reliable and effective spark delivery
-
Specifications
Specifications Engine Type V-10 Bore and Stroke 3.55 in x 4.17 in (90.2 mm x 105.8 mm) Displacement 6.8 Litre (415 CID) Compression Ratio 9:1 Oil Capacity 6 Qts (4.26 litres) Net Weight 640 Lbs (290 Kgs) Dimensions L 28.5″ x W 31.7″ x H 30.4″ (723.5 mm x 805.1 mm x 772.6 mm) Gasoline (corrected per SAE J1995) Fuel Specification Unleaded 87 or 89 octane Rated Power @ 3200 RPM Intermittent: 222 HP (165 kW) Continuous: 201 HP (150 kW) Peak Torque @ 3200 RPM Intermittent: 360 Ft. Lbs. (488 Nm) Continuous: 324 Ft. Lbs. (439 Nm) Natural Gas (corrected per SAE J1995) Fuel Specification 1050 BTU/FT3 Rated Power @ 3200 RPM Intermittent: 210 HP (156 kW) Continuous: 189 HP (141 kW) Peak Torque @ 3200 RPM Intermittent: 329 Ft. Lbs. (446 Nm) Continuous: 298 Ft. Lbs. (404 Nm) Liquefied Petroleum Gas (corrected per SAE J1995) Fuel Specification HD-5 Rated Power @ 3200 RPM Intermittent: 230 HP (171 kW) Continuous: 206 HP (153 kW) Peak Torque @ 3200 RPM Intermittent: 370 Ft. Lbs. (501 Nm) Continuous: 330 Ft. Lbs. (447 Nm) Specifications: Click here to view.
In order to view the specifications document, please make sure that you have Adobe Reader. Click here to download.
